Lighting

The lights in the main hall, side aisles and foyer are all controlled from the panel on the wall by the kitchen door.

You can adjust the brightness of the side aisle and entrance lights by pressing and holding the up and down buttons on the panel.

The pillar lights can quickly add a splash of colour to the hall. You can find the remote control for them in the blue remotes container in the kitchen.

To set all the lights to a solid colour you can either press one of the preset colour buttons or run your finger around the colour wheel on the remote.

If you want the lights to fade between colours or flash, press the "M" button. You can then use "+" and "-" buttons to adjust the speed.

On the control touch screen's home page, tap the "Lights" button to access our lighting controls.

Switching the lights on

Before our lights can be used they will need to be switched on. You can do this by tapping the "Switch power on" button on the touch screen. It will take a moment for the lights to finish switching on, after which you can choose your lights using the touch screen.

On stage

The stage can be lit from the front, either at full power or half power. This is an even, cool white light.

The Main Hall

The ceiling of the main hall above the dance floor can either be lit in plain white, or in randomly changing colours.

When you're done

If you're finished using the lights, you can tap one of the "Off" buttons to turn the lights off for that part of the building. "All off" will turn everything off at once.

To switch power to the lights off, tap "Switch power off"